Director's Column

Director's Column vol.7 ● Inside the Mouth: A Black Box, Part 3

Restorative (conservative) treatment is the kind of treatment given for a cavity that doesn't require removing the nerve, and it broadly falls into two approaches: cutting away the decay, taking an impression, and fitting a prosthesis (a crown or inlay made of metal or another material), or cutting away the decay and filling it directly with resin (so-called "plastic"). With the former approach, there are things that have to be prepared before cutting so that the prosthesis won't come loose easily. First, the softened dentin (the part made soft by decay) is removed. If the affected area is small, it disappears naturally during cutting, but if it's large, the surface has to be disinfected after removal and then covered with cement before being reshaped (cut) again. When the prosthesis is metal, the corners and edges are cut clearly to create mechanical retention (so that the piece resists coming loose on its own) — though the margin itself must never be left as cement, since that would dissolve in saliva or water. Even areas thinner than one millimeter are cut into a shape that can be covered. Under insurance, this results in what's commonly called a "silver tooth." With private (self-pay) treatment, the material becomes a gold or platinum alloy, though the shaping itself doesn't differ. There is a difference between insurance and private treatment in the impression-taking and in the cement used at the time of fitting, but in both cases the piece is adjusted and polished into place afterward — this is done to keep the gap between the tooth and the metal as small as possible. For private treatment, it has also become increasingly common to choose a hybrid material (one that combines high hardness with a degree of flexibility), the advantage being that it can be matched to the color of the tooth. However, unlike with metal, the shaping has to be done with a slight taper, rounding the whole surface off.

The latter approach — the resin filling — is used mostly for cases where the decay is minor, or for cavities in the front teeth. That said, with improvements in resin materials, it's increasingly being used for larger cavities in the back teeth as well. Its advantages are that you only need to remove the minimum amount of decayed tooth, without having to shape it into the fixed form required for the former approach, so it puts that much less stress on the tooth; it also comes in a wide range of shades, so it can be matched to each patient's own teeth. Its disadvantages are that resin absorbs water and deteriorates faster than metal does. People with poor oral hygiene, a smoking habit, or a high frequency of drinking coffee, green tea, or black tea often develop staining (a dull discoloration) on it. There are toothpastes designed to remove such stains, but once staining has set in stubbornly, it seems to require mechanical removal at the dental clinic. A common case for this treatment is a wedge-shaped defect (an area near the gumline, next to the gum tissue, worn away by side-to-side brushing), which can cause sensitivity when air hits it. Here too, though, if the gum tissue isn't in good condition, resin often can't be packed properly into that border area. In such cases, I sometimes show the patient the area, suggest they brush more thoroughly first, and save the treatment for the next visit. A slight unevenness at the edges of the front teeth, or small gaps between teeth, can usually be corrected so cleanly that you can't tell any work was done afterward, which patients often appreciate. That said, some dentists won't do this kind of work at all, on the grounds that it isn't treating a cavity, and instead recommend private (self-pay) treatment such as laminate veneers — so please weigh the situation carefully and think it over. Given how many variations there are, don't simply leave the choice of treatment entirely up to your dentist.

Igarashi Dental Clinic | Shimbashi, Tokyo
Director Atsuo Igarashi